Phone#: +27 (0)11 310 8660 / 2324 / 7113
Fax#: +27 (0)86 545 6012
BRECON External Vibrators for the Conveying Industry
EMPOWERDEX BEE Rating
"AAA" - Level Two Contributor
Radolid® Protection Caps
Safety Netting / Barrier Netting
Try our scaffolding accessories!
External Vibrators for the Conveying Industry
For applications like conveying, sieving, loosening and breaking-up,
BRECON offer a big range of external vibrators from 500 1/min up to
3.000 1/min. All these vibrators are available in 50Hz and 60Hz mains
frequency and on request special executions (e.g. 500V) are available.
We would be pleased to help you selecting the correct vibrator for your
Conveying and Sieving
The function and selection of external vibrators for conveying and sieving
is quite similar. Only the positioning of the vibrators on the aplication
is different. If you choose 3000 1/min, 1500 1/min, 1000 1/min or even less
vibrations depends on the size of the material to be conveyed/sieved and
from the desired conveying speed. For small size gravel like powder or fine
sand 3000 1/min vibrators should be selected. Bigger size material like stone
and big gravel requires lower vibration frequencies like 1000 1/min.
Loosening and Breaking-up
External vibrators are also used to loose blocks of the material in the outlet
part of silos or other storing containers. Caused by the vibration the friction
between the material parts is reduced and the adhesion between the material
and the silo wall is loosened. For fine material like chalk and fine gravel
3000 1/min would be used and for material with bigger grain size the vibration
would be done with 1500 1/min.